Shenzhen Hicorpwell Technology Co., Ltd
5 1

Black Leather Sheath Fibre Optic Test Pen Visual Fault Detector 2.5mm Connector

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Contact us

Shenzhen Hicorpwell Technology Co., Ltd
[China]

Address
Rm 604 Bldg 9th Yinxingyuan South Rd Nanshan District 518054 Shenzhen China Shenzhen Guangdong
Phone
86-0755-23036652
Contact name
Yvone

Quick Information

  • Brand Name: HICORPWELL
  • Place of Origin: China
  • Model Number : Fiber Optic Visual Fault Detector

Description

network fiber checker fiber optic visual fault detector

 

Model QY-VFL650-2S
Central wavelength 650nm±10nm (635nm is available on request)
Emitter type FP-LD
Output power 5mw
Laser Range ≥5km
Optical connector 2.5mm universal connector, for 1.25mm connectors, FC (Male)-LC. (Female) convertor can be provided on request
Operating mode Both CW and Pulse available
Pulse frequency 2Hz to 3Hz / 9Hz
Power supply 2AA alkaline batteries
Battery LR6 AA alkaline battery
Operating temperature -20°C to 60°C
Storage temperature -40°C to 85°C
Dimension 25 x 195mm
Weight 165g (without battery)

 

Method of use

 

1. Screw the end cap from the pen, the battery will be prepared into the pen, battery cathode to the end cap, the positive on the pen body is positive;(note: please do not turn pen and pencil tail into the battery)


2. Put the pen and pencil body connection installed, open the dust cap, press the control switch one time, observe the interface has a red light, luminous tube on at the same time;(note don't eyes were light interface, so as not to damage the eye)


3. Press the control switch again, observe the light into a pulse mode, the indicator light-emitting tube and out of sync pulse light;(pulse frequency in 2-3 hz or 9 hz)


4. Press the control switch again, light source closed, no light output, at the same time indicator light pipe out;(switch mode to: continuous - pulse - closed - continuous cycle mode)


5. When detecting insert tested optical fiber optical interface, press the control switch at the same time, choose the output light work mode (continuous or pulse);


6. After use, build the dust cap, do not use for a long time, please take out the battery, in order to avoid battery rot, damage the light source.

 

 

Maintenance and matters needing attention

 

1. Laser and harmful, especially to pay attention to protect the eyes, when laser works, avoid to irradiate the eyes with laser directly;
 
2. In generally, the higher the temperature, the shorter the life of laser, when used to avoid high temperature working environment;

3. The work of laser optical fiber head should be cleaned;

4. When used, the optical interface and the interface needs to detect light and light pull plug;

5. Don't use the light source, would you please put dust cap to avoid dust fall;

6. Should remove the battery when not in using;

7. Please do not remove the end cap and any part of the dust cap, remove shall not be responsible for damage caused.Fiber Checker Fiber Tester Tools Optic Visual Fault Detector

network fiber checker fiber optic visual fault detector

 

 


Product Image

  • Black Leather Sheath Fibre Optic Test Pen Visual Fault Detector 2.5mm Connector image

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Yvone
Shenzhen Hicorpwell Technology Co., Ltd
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Mobile Phone Stickers
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.